Socket Systems Homes Building with Lumber Link is as Easy as 1-2-3 Socket System Products Custom Build with Lumber Link Samples of Socket System Projects Contact Socket Systems
Lumber Link Kits
  • Eliminate Trusses
  • Makes room for a second floor
  • Uses rough-cut 6"x6" lumber or wood members
  • Eliminates treated wood saving the environment
  • Frames can be PULLED upright without a crane
  • Frames DON'T sit in concrete to eventually rot
  • Frame assembly done on the ground
  • Allows for lower eaves and higher door openings

Lumber Link Kits > K2004
SKU: K2004
Lumber Link Gambrel Kit
 (4/12 Pitch)
SKU: K2004
(1) Gambrel Kit will make (1) frame (less lumber). This Kit uses 6"x 8" Rafter Beams and 6" x 6" Posts. Maximum width for this Kit is 30 wide, 8 ft. Bay Spacing depends on which area you want to build.
Price: $POA

Lumber Link is sold in Kits. (1) Gambrel Kit which will make (1) frame (less lumber).

The Kit contains the following items:

(5) Gambrel Elbows (4/12 pitch) using 6"x 8" Beams and 6" x 6" Posts
(5) Peak & Haunch Elbows
(2) Hinged Frame Anchor
(2) Anchor Base Plates
(44) Lag Screws
(4) Anchor bolts
(8) Washers
(4) Common nuts
(4) Jam nuts

- Rafter Beams MUST be #1 construction grade timber, LVL (laminated veneer lumber) or Glulams

- The maximum width of Lumber Link interior space is 30 feet without custom bracing.

- The length of your building is up to you.

- The majority of Lumber Link buildings use 8ft or 10 ft. Bay Spacing

- The maximum height of your building is determined by local building codes.

- Maximum side wall height is generally 14 feet without a second floor.

- Purlin clips are spaced every 2 feet.

- Posts and Beams MUST be cut at correct angles for 100% contact within sockets.

- Upper roof beam on Gambrel Kit may be shortened to increase snow load capacity.
HOME     |     EASY AS 1-2-3     |     PRODUCTS     |     CUSTOM BUILDING     |     SAMPLES     |     CONTACT